Table of Contents
Advertisement
BEFORE FIRST USE
1.
Leave the dyer to stand for at least 2 hours after transporting.
2.
Use a soft cloth to clean the inside drum.
3.
Place some clean rags into the drum.
4.
Connect the power cord and press the Power button.
5.
Select the "Refresh" programme and press Start/Pause button.
6.
After finishing this programme, refer to the "cleaning and care" section of this user
guide to clean the filter. Note: During drying, the compressor and the water will
generate some noise which is entirely normal.
•
Before drying, ensure that the laundry has been thoroughly spun in the washing
machine. Higher spin speeds reduce drying time and save energy.
•
For consistent drying results, sort the laundry based on fabric type and select the
appropriate drying program.
•
Before drying, please close zippers, hooks, eyelets, buttons, and tie fabric belts securely.
•
Remove any objects from pockets, such as lighters and matches.
•
Sew in or remove underwiring from bras before drying.
•
Close duvet covers and pillowcases to prevent small items from getting rolled up inside
them.
•
Keep jackets open and unzip any long zippers to allow textiles to dry evenly.
•
Avoid over-drying clothes as excessive drying can lead to increased wrinkling.
•
Do not dry items that contain rubber or similar elastic materials.
•
Maintain cleanliness in the vicinity of the tumble dryer. Accumulation of coal dust or
flour can pose an explosion risk.
•
The door should only be opened after the tumble dryer's program has finished to
prevent scalding from hot steam or an overheated drying machine.
•
Clean the lint filter and empty the water tank after each use to prevent prolongation of
drying time and excessive energy consumption.
•
Do not dry clothes that have undergone dry-cleaning processes.
14
Advertisement
Table of Contents
