Dryer does not start
Degree of dryness was not
reached or drying time too
long
There are humming noises
The dryer switches off at the
end of the programme
•
Ensure dryer is connected to power supply.
•
Press the Power button
•
Ensure the door is closed.
•
Check the programme is set.
•
Press the Start/Pause button.
•
Clean lint filter and heat exchanger.
•
Empty the water container.
•
Check the drain hose.
•
Check installation place is appropriate.
•
Ensure the air inlet is clean.
•
Use higher drying intensity level programme or
longer time programme.
The compressor is operating. This is not an error but
a normal function.
The dryer switches off automatically for energy
saving. This is not an error but a normal function.
27