Flashforge Adventurer 4 Pro User Manual page 18

Polar Cloud
Register the Polar Cloud account at https://Polar3d.com.
After logging into your account, click the icon on the top right corner and click [Settings].
Find the PIN Code in the page. Turn on the Polar Cloud switch and enter the account and
PIN code after connecting Adventurer 4 Pro to network.
2.Model Removal
Adventurer 4 Pro: Take out the removable build plate, and bend the plate to get the
model. When printing for the second time, please ensure that there is no residual
filament on the platform.
Note
The nozzle and build plate are still hot after finishing printing. Please wait for
them to cool down before conducting operation.
The back side of the build plate is designed exclusively for PETG. Please use the
back when printing with PETG.
Please remove models after the platform has cooled down. If models are removd
when the platform is not completely cooled down, bubbles will occur on the
surface of the platform.
It is recommended to take the platform to the outside of the equipment for model
removal, otherwise the model debris will remain in the equipment. Please keep
the inside of the printer clean.
16