Calibration - Flashforge Adventurer 4 Pro User Manual

6.4.3 Calibration

It is necessary to calibrate the distance between the nozzle and the platform after the first
use or replacement of the nozzle;
Expert mode：Expert mode is for experienced users to directly calibrate the distance.
Click to make the extruder move upwards. Click to make the extruder move
downwards.
Normal Mode: The extruder calibration and multi-point leveling offset are included.
Click [Normal Mode] to start pre-calibration. The first point is to calibrate the initial
distance between the extruder and the platform. Click the up and down arrows to adjust
the Z-axis deviation value. You can also sense if there is slight resistance by pulling the
leveling card between them to decide the appropriate distance. After calibrating the first
point, please follow the on-screen prompts to continue to complete the multi-point
automatic leveling.
30 30 Point Auto Calibration
23