Topping Up The Gear Oil - Linde 1131-02 Series Original Instructions Manual

 When necessary, you must top up from the
filler port (1) with the specified hydraulic oil.
 After topping up, lift the forks. The oil level
is fully topped up when you no longer hear
popping noises; continue to add oil if you
still hear popping noises.
 Refit by following the above steps in re-
verse order.

Topping up the gear oil

 Park the truck as specified.
 Pull the key switch out to prevent the truck
from being accidentally started.
CAUTION
If you need to work underneath a raised truck, take
effective measures to prevent accidents such as the
truck overturning or slipping.
 Remove the cover.
 Pour correct gear oil into the grease fitting
(1).
CAUTION
Do not add gear oil that contains impurities.
 Refit by following the above steps in re-
verse order.
Operating Instructions - 1131 801 1601 EN - 12/2021 - 04


Maintenance
Essential maintenance
5
67