Table of Contents
Advertisement
Linde's business philosophy is to constantly
improve the design and structure of its prod-
ucts. Linde therefore reserves the right to
change the design and technical parameters
of its trucks at any time.
The company declines any responsibility for
claims regarding the technical parameters, il-
lustrations and instructions in this user man-
ual.
The attachment operating instructions are en-
closed for trucks that are delivered from the
factory with an attachment. Before commis-
sioning a truck with an attachment, you must
check that loads are handled safely. Depend-
ing on the type of attachment, it may be nec-
essary to make adjustments, e.g. pressure
settings or adjusting stops and operating
speeds. Corresponding instructions can be
found in the attachment operating instructions.
The instructions for operation of the attach-
ment must also be observed.
Carry out the specified work regularly, at the
due times and using the consumables de-
signed for this purpose in accordance with the
inspection and maintenance overview. Make
sure that you record any work performed in
the registration document for the industrial
truck; this is essential for any warranty claims.
The designations used in the text (front, back,
left, right) always refer to the installation posi-
tion of the parts described in relation to the
forward drive direction of the truck.
Servicing work not described here will require
specialist knowledge, measuring instruments
and, often, special tools. Please ask your au-
thorised dealer to carry out this work.
Servicing should only be carried out by com-
petent personnel (specialists) approved by
Linde.
For questions about the truck and orders for
spare parts, please contact your local Linde
dealer and leave a full shipping address.
To maintain the original technical efficiency of
the truck, please use authentic Linde spare
parts when repairing.
Operating Instructions - 1131 801 1601 EN - 12/2021 - 04
When ordering spare parts, in addition to part
numbers, please provide the following infor-
mation:
Truck model number:
Serial number/year of manufacturing:
Delivery date:
Part numbers should be specified when order-
ing parts.
Part number of the lift mast:
Lifting height of the lift mast [mm]:
When taking delivery of the forklift truck, copy
data from the component identification plates
into this user manual. The relevant information
can be found on the identification plates on
the truck. We recommend you write down this
information in the manual for future reference.
Truck handover
Before leaving the factory, every truck must be
carefully examined so that it is completely up
to standard and can be delivered to the user in
perfect condition.
To guarantee the truck works correctly, Linde
dealers are obliged to check the following
items before the handover:
Check whether the drive wheel nuts are
tightened
Check the battery status
Check the hydraulic oil level
Check the braking function
Check the steering function
Check the traction function
Check the lift mast and attachment func-
tions
1
Introduction
Introduction
3
Hide quick links:
Advertisement
Table of Contents
