Introduction Introduction - Linde 1131-02 Series Original Instructions Manual

1
Introduction
Introduction
Introduction
Your Linde forklift truck (made in China)
gives you the very best in terms of perform-
ance, safety and driving comfort. However, it
is up to you, the truck operator, to preserve
these qualities for a long time to come and to
make full use of their benefits on the job.
During the manufacturing process (if affixed
with conformity mark):
 We adhered to all declaration of conformity
safety requirements.
 We carried out all compliance tests required
by law.
This is proven by the conformity stamp shown
on the identification plates.
The manual provides you with important infor-
mation on activating, driving, operating and
maintaining a Linde forklift truck.
Regularly and promptly complete the mainte-
nance checklists in accordance with the truck
operating instructions and use the specified
tools, cleaning products etc.
In order to maintain valid warranty service for
your truck, please keep and save a complete,
detailed record of the maintenance process.
All maintenance procedures must be recor-
ded; otherwise you will lose the warranty.
Users, especially forklift truck drivers and re-
pair personnel, must strictly adhere to GB/T
36507 regulations.
Users, especially forklift truck drivers and
maintenance personnel, must strictly follow
"Guidelines on correct and safe use of materi-
als handling equipment" and BITA guidelines.
(Overseas edition)
The user shall be responsible for any loss
caused by improper use. The manufacturer
Linde Ltd shall not be responsible for such
loss.
If you want to use the truck for purposes that
are not mentioned in the user manual, please
contact dealers accredited by Linde Corp. Ltd.
2
Any modification of your truck, in particular fit-
ting of equipment or conversion of the truck, is
prohibited without the permission of the manu-
facturer.
If the manufacturer is no longer in business
and there is no successor to the business, the
user may arrange for a modification or altera-
tion to the truck, provided that the user:
Arranges for the modification or alteration to
●
be designed, tested and implemented by an
engineer who is an expert in industrial
trucks and the associated safety considera-
tions
Maintains a permanent record of the de-
●
sign, testing and implementation stages for
the modification or alteration
Makes appropriate changes to the designa-
●
tion plate, decals, tags and operation and
maintenance manuals
Attaches a permanent and easily visible la-
●
bel on the truck providing information about
the manner in which the truck has been
modified or altered together with the date of
the modification or alteration, and the name
of the organisation that completed this work
Attachment manuals are provided
NOTE
Add a load identification plate for any attach-
ments to the truck.
CAUTION
To maintain stability and the specified minimum brak-
ing distance, do not carry out stacking/unstacking op-
erations on a slope.
The climbing degrees in the type sheet are ascer-
tained from the truck's pulling force, and only apply
when going over small obstacles and driving on rela-
tively flat surfaces.
Technical notes
This user manual must not be copied, transla-
ted or sent to a third party without the manu-
facturer's written consent.
Operating Instructions - 1131 801 1601 EN - 12/2021 - 04