Linde 1131-02 Series Original Instructions Manual page 47

Steering
 Turn the operating handle (1) left or right
according to the desired direction.
Braking
Emergency stop
 Press the emergency off switch (2). All elec-
trical functions will be interrupted.
Forced braking
Releasing the operating handle will force the
brakes. The operating handle will automatical-
ly move to the upper braking position (B). Al-
ternatively, the brake can be forced by press-
ing the operating handle down to the lower
braking position (B).
CAUTION
If the operating handle moves into the braking posi-
tion slowly, identify the cause and rectify the fault.
Regenerative braking
Release the drive switch. The drive switch will
automatically return to the initial position
(speed is 0). The vehicle will enter the regen-
erative braking state and slow down. When it
decelerates to less than 1 km/h, the brake will
bring the motor to a stop.
CAUTION
Activate the drive switch. If the drive switch cannot
quickly return to the initial position, or resets very
slowly, identify the cause and rectify the fault. Re-
place the handrail elbow if necessary.
Reverse brake
Turning the drive switch to the opposite direc-
tion while travelling brakes the truck by re-
verse current until it starts moving in the oppo-
site direction.
Operating Instructions - 1131 801 1601 EN - 12/2021 - 04

4
Operation
Drive system
37