Safety Guidelines - Linde 1131-02 Series Original Instructions Manual

2
Safety

Safety guidelines

Safety guidelines
The "Rules for proper use of industrial trucks"
supplied with these operating instructions
must be brought to the attention of the per-
sons in charge, in particular to those persons
concerned with operating and maintaining the
industrial truck, before working with or on the
truck.
The operating company must ensure that the
driver understands all the safety information.
Observe the relevant regulations and guide-
lines, e.g.:
Operation of industrial trucks
●
Driving licences
●
Rules for driveways and the area of opera-
●
tion
Driver rights, duties and rules of behaviour
●
Special operating areas
●
Information regarding setting off, driving
●
and braking
Information for maintenance and repair
●
Periodic checks
●
Disposal of greases, oils and battery
●
Residual risks
●
As the operating company or responsible per-
son, ensure that all directives and safety
guidelines that are applicable to your industrial
truck are complied with.
When training a truck driver who has already
been trained to the BGV D 27 standard, the
following must be practised sufficiently by
training, driving, switching and steering, so
that they are fully mastered:
Any special equipment for attachments
●
Features of the operating and working area
●
Only then should intensive training exercises
commence.
14
Safety information
DANGER
The truck must not be used by unauthorised per-
sons.
As the operating company, you must ensure that ac-
cess to the truck is only possible for authorised per-
sonnel.
DANGER
Safety systems are there for your safety.
Safety systems - of any kind - must never be disa-
bled.
DANGER
Loads should be arranged so that they do not
project beyond the edge of the truck loading sur-
face and cannot slip, topple over or fall off.
If necessary, use a load backrest (special equip-
ment).
DANGER
When retrofitting a third auxiliary hydraulic system,
using solutions other than those recommended by
the truck manufacturer will render the relevant con-
formity null and void, and is therefore expressly
prohibited.
Trucks may only be retrofitted with a third auxiliary
hydraulic system with the approval of the truck man-
ufacturer.
CAUTION
Welding operations on other parts of the truck can
cause damage to the electronics.
Therefore, always disconnect the battery and all con-
nections to the electronic controls beforehand.
Operating Instructions - 1131 801 1601 EN - 12/2021 - 04