Disassembling And Installing The Battery_Plug Model (Optional*) - Linde 1131-02 Series Original Instructions Manual

 Remove the 4 stud bolts (1) and take off the
electrical apron (2).
 Remove the 4 stud bolts (3) and take off the
battery charger apron (4).
 Remove the battery's (5) power cables.
 Remove the 8 stud bolts from the battery
and carefully remove the battery (5)
CAUTION
When removing the cables, put them aside carefully
to avoid damaging them during the procedure.
Install the battery in reverse order, paying at-
tention to the location where the battery is in-
stalled and whether the wiring is correct.
Route the battery cable so that it is not cut
when the battery is inserted.
Disassembling and installing the
battery_plug model (optional*)
Before disassembling and installing the bat-
tery, you must raise the truck to the highest
position and then turn off the truck's power
supply.
Disassembly/installation steps:
 Remove the key switch (1) to turn off the
power.
 Remove the lithium-ion battery (2).
CAUTION
When removing the cables, put them aside carefully
to avoid damaging them during the procedure.
Install the battery in reverse order, paying at-
tention to the location where the battery is in-
stalled and whether the wiring is correct.
Route the battery cable so that it is not trap-
ped when the battery is inserted.
Operating Instructions - 1131 801 1601 EN - 12/2021 - 04
Battery Use and Maintenance


4
Operation
51