Linde 1131-02 Series Original Instructions Manual page 53

CAUTION
Take care not to disturb any adjacent loads, or those
which may be to the side or in front of the load being
handled.
Loads should be laid out as follows:
 Line up loads with a small space between each
one and its neighbour to avoid any fouling.
CAUTION
Only transport loads that have been positioned and
secured in accordance with regulations.
Take appropriate protective measures if the load is at
risk of tipping over or falling during transport.
 Approach the load carefully.
 Adjust the height of the forks until they can
be easily inserted into the pallet.
 Insert the forks under the load.
 If the load is shorter than the forks, position
the forks so that the front of the load over-
hangs them by a few centimetres, to avoid
interference with the load immediately
ahead.
 Raise the load a few centimetres above its
support.
 Back the truck away from the stack or any
neighbouring loads, gently and in a straight
line.
Transporting loads
 Always carry loads in the forward direction
of travel (A) in order to have the best visibili-
ty.
 When carrying a load on a slope, always
ascend or descend with the load uphill.Nev-
er drive sideways across a slope or perform
a U-turn.
 Reverse travel (B) is to be used solely for
unloading.Since visibility is reduced when
travelling in this direction, drive only at very
slow speed.
Operating Instructions - 1131 801 1601 EN - 12/2021 - 04

4
Operation
Load handling
43