Residual Risks; Use Of Lubricants - Linde 1131-02 Series Original Instructions Manual

2
Safety

Residual risks

Residual risks
Despite careful work and compliance with all
applicable standards and regulations, the pos-
sibility of other dangers when using the indus-
trial truck cannot be entirely excluded.
The industrial truck and its possible attach-
ments comply with current safety regula-
tions.Nevertheless, even when the truck is
used for its proper purpose and all instructions
are followed, some residual risk cannot be ex-
cluded.
Even beyond the narrow danger areas of the
industrial truck itself, a residual risk cannot be
excluded.Persons in the area around the in-
dustrial truck must exercise a heightened de-
gree of awareness, so that they can react im-
mediately in the event of any malfunction, inci-
dent or breakdown.
DANGER
Persons in the vicinity of the industrial truck must
be informed about the dangers of the truck.
These operating instructions also contain additional
safety regulations.

Use of lubricants

Lubricants must always be used in conformity
with the instructions supplied by the manufac-
turer.
Lubricants must be stored only in the prescri-
bed receptacles in the proper places. They
may be inflammable, so do not bring them into
contact with a flame or hot object.
Use only the proper receptacles for draining
liquids.
Pay attention to the safety and recycling ad-
vice of the manufacturer of the ingredient or
cleaning product
Avoid any spillage of lubricants. Use absorb-
ent materials to clean any floor spillage, and
recycle such materials correctly.
16
Residual risks can include:
Escape of consumables due to leakages or
●
the rupture of lines, hoses or containers
Risk of accident when driving over difficult
●
ground such as gradients, smooth or irregu-
lar surfaces, or with poor visibility
Risk of falling, tripping, slipping etc. during
●
movement of the industrial truck, especially
in the wet, with leaking consumables or on
icy surfaces
Risk of fire and explosion due to the battery
●
and electrical voltages
Human error
●
Disregarding the safety regulations
●
Risk caused by unrepaired damage
●
Risk caused by insufficient maintenance or
●
testing
Risk caused by using the wrong consuma-
●
bles
Always dispose of used or contaminated lubri-
cants as specified.
Clean the parts concerned before carrying out
lubrication, changing filters or working on the
hydraulic system.
Any worn out parts removed must be recycled
in conformity with regulations for protection of
the environment.
WARNING
Accidental penetration of hydraulic fluid under the
skin is dangerous.
See a doctor immediately if injured.
Operating Instructions - 1131 801 1601 EN - 12/2021 - 04