Refill Indicator; Dispensing Liquid Process Chemicals - Miele PG 8504 Operating Instructions Manual

Adding and dispensing process chemicals
Checking con-
sumption

Refill indicator

Dispensing liquid
process chemi-
cals
52
Push the suction wand into the opening of the container and secure

the lid. Observe the color coding.
Feed the suction wand into the container until it reaches the bot-

tom.
Wipe up any spilled process chemical thoroughly.

Place the container on the floor next to the machine or in an adja-

cent cabinet. The container must not be placed on top of or above
the machine. Make sure that the dispensing hose is not kinked or
trapped.
After that, the dispensing system must be primed (see "Settings  /

Priming DOS").
Check consumption regularly by checking the fill levels in the supply
containers and replace containers in time.
When the fill level is low in the
process chemical, you are reminded to replenish it.
Confirm the message shown with OK and

Refill the liquid process chemicals as described.

If the container is empty, the machine will be locked against further
use.
It will be ready for use again when the supply container has been
replaced.
For information about setting the dispensing concentration, see "Ad-
ditional settings / Additional functions / Dispensing systems".
DOS 1
supply container for liquid
Refill DOS