Table of Contents
Advertisement
Dispensing concentration
The dispensing concentration for liquid
process chemicals is set in the same way
for all dispensing systems. The setting ap-
plies to all programs.
This selection is only available if the cor-
responding dispensing system is present
(depending on the model).
Rinse aid door
Cleaning agent canis-
ter
Rinse aid canister
Start by selecting a dispensing system.
Dispens. concentration
0,03
Set the dispensing concentration.
Press
OK
to save the setting.
Filling dispensing paths
See
Machine functions
Rinsing dispensing paths
See
Machine functions
08:15
0,05
0,04
%
0,02
0,01
OK
Additional settings
Cycles until empty
When dispensing liquid process chemicals
from external media canisters, the fill level in
the canister is monitored. You can use the
following function to set the number of pro-
gram sequences (cycles) from which you
want to be warned about the imminently
empty media canisters. The message is dis-
played after switching on the machine and
before every program start.
You can set the number of cycles from 0–
150 cycles.
Cycles until empty
Set the number of cycles.
OK
Press
to save the setting.
08:15
30
20
10
OK
71
Advertisement
Table of Contents
