Beeper Setup; Hypo/Hyper Alarms Setup - A.MENARINI GLUCOFIX TECH GK User Manual

NOTE
● The alarm will have the format (12H, 24H) set for the time.
● Alarm settings will not be erased when changing the batteries.

7.3 Beeper setup

The beeper on your GLUCOFIX
the beeper feature as follows.
1. Press ▲ or ▼ to turn the beeper ON or OFF.
2. Press to confirm and return to the setting menus (step 3 §7).
WARNING
● Turning off the beeper could mean you miss many important cues from
your meter, such as confirmation or error messages.

7.4 hypo/hyper alarms setup

Your GLUCOFIX TECH GK meter has an alarm feature that allows you to set your
®
high (hyperglycemia) and low (hypoglycemia) blood glucose thresholds. Based
on the values set, the screen will show "hypo" or "hyper", depending on whether
your blood glucose test result is below your low glucose or above your high
glucose threshold values.
WARNING
● Consult your doctor or healthcare provider when setting the Hypo and
Hyper values.
● Do not alter or stop your medication based on this feature, always consult
your doctor or healthcare provider before altering or stopping medication.
The hypo/hyper alarms on your GLUCOFIX
You can set up the hypo and hyper threshold values as follows:
1. Press ▲ or ▼ to turn the hypo alarm ON/OFF.
2. Press to set the hypo alarm value (if ON).
3. Press ▲ or ▼ to select the desired value. Press and hold either ▲ or ▼ to
accelerate the numbering.
4. Press to confirm the selection and move on to the hyper alarm setup.
TECH GK meter is preset to ON. You can adjust
®
TECH GK meter are preset to OFF.
®
EN
25