Data Transmission; Nfc Transmission - A.MENARINI GLUCOFIX TECH GK User Manual

EN
NOTE
● If there are no results in the memory, the screen displays "ooo".
● At the end of reviewing the individual test results, the screen displays
"ooo".
● Keep ▲ or ▼ pressed to speed up the browsing through the results.
● To switch between β-ketone and glucose results memories during data
review, press
mode selection.

6.4 Data transmission

Test results stored in the GLUCOFIX
downloaded to GlucoLog
USB cable.
NOTE
● GlucoLog
®
manuals for instructions on how to download data.
● The USB cable and the connected device should comply with IEC 60950-1
or IEC 62368-1 standard.
● DO NOT link another person's NFC-equipped device with your GLUCOFIX
TECH GK meter. To link the NFC-equipped device with your meter,
following the steps of Upload data via NFC (§6.4.1).

6.4.1 NFC Transmission

For data transmission by means of NFC, the NFC function must be enabled on
the GLUCOFIX
®
smartphone) with GlucoLog
1. Activate the NFC transmission on the GlucoLog
device.
2. Bring the GLUCOFIX
the NFC-equipped device.
NOTE
● Data will be transmitted even when the meter is switched off or in
memory recall mode.
22
for 3 seconds to go back to the "Glu"/"Ket" memory
®
software or apps by means of either NFC or a standard
®
software and apps are supplied separately. See relevant user
TECH GK meter (§7.6) and an NFC-equipped device (such as a
apps.
®
TECH GK NFC antenna close (< 1 cm) to the antenna of
®
TECH GK meter's memory can be also
app of the NFC-equipped
®
®