Managing Your Test Results; Reviewing Glucose Past Results; Viewing Glucose Results Averages - A.MENARINI GLUCOFIX TECH GK User Manual

EN

6. MANAGING YOUR TEST RESULTS

WARNING
Please make sure that time and date are correct before the first use and
adjust them if needed (§7.1). If the time and date settings are not correct the
meter will memorize the test results assigning them wrong time and date.

6.1 Reviewing glucose past results

You can review past results stored in the memory. Your meter stores up to 730
glucose test results with dates, times and markers.
1. Make sure the meter is off (to turn the meter off hold
the screen switches off).
2. Press for 2 seconds to turn the meter on and enter the memory recall
mode (the "mem" icon appears on the screen and the "Glu" icon will blink).
3. Press to enter in the glucose results memory.
4. The most recent test result appears on the screen. The screen also shows the
"Glu" icon, the date and time of the test, and the corresponding markers.
5. Press ▲ or ▼ to scroll through all the stored data.
6. Press for 3 seconds to switch the meter off.
NOTE
● If there are no results in the memory, the screen displays "ooo".
● At the end of reviewing the individual test results, the screen displays
"ooo".
● Keep ▲ or ▼ pressed to speed up the browsing through the results.

6.2 Viewing glucose results averages

You can view the glucose result averages over the set intervals (1, 7, 14, 30, 60 or
90 days).
1. Follow steps 1, 2 and 3 in §6.1.
2. Press to enter the average mode (the "avg" icon appears on the screen).
3. The 1-day average appears on the screen.
4. Press to scroll through the averages.
20
for 3 seconds until