Β-Ketone Test Warning Setup - A.MENARINI GLUCOFIX TECH GK User Manual

EN
5. Press ▲ or ▼ to turn the hyper alarm ON/OFF.
6. Press to set the hyper alarm value (if ON).
7. Press ▲ or ▼ to select the desired value. Press and hold either ▲ or ▼ to
accelerate the numbering.
8. Press to confirm the selection and return to the setting menus (step 3 §7).
7.5 β-Ketone test warning setup
Your GLUCOFIX
warning feature that allows you to set a blood glucose threshold as a warning for
blood β-ketone testing. When the β-ketone test warning is turned ON, if your
blood glucose is above the set threshold, the ketone icon "Ket" will start blinking
and an intermittent beep will sound, reminding the user that a blood β-ketone
test would be recommended.
WARNING
● Consult your doctor or healthcare provider when setting the β-ketone test
warning value.
● Do not alter or stop your medication based on this feature, always consult
your doctor or healthcare provider before altering or stopping medication.
The β-ketone test warning on your GLUCOFIX
You can set up the β-ketone test warning threshold value as follows:
1. Press ▲ or ▼ to turn the β-ketone test warning ON/OFF.
2. Press to set the blood glucose threshold value (if β-Ketone test warning is
ON).
3. Press ▲ or ▼ to select the desired value. Press and hold either ▲ or ▼ to
accelerate the numbering.
4. Press to confirm the selection and return to the setting menus (step 3 §7).
NOTE
● The minimum settable β-ketone test warning threshold is "hyper"
+0,1 mmol/L. This is valid also if "hyper" warning is OFF (in this case the
default value of 10 mmol/L is considered).
26
TECH GK blood glucose and β-ketone meter has an additional
®
TECH GK meter is preset to OFF.
®