Marking Test Results - A.MENARINI GLUCOFIX TECH GK User Manual

CAUTION
● If you still have test results that fall outside the acceptable range, stop
using the system, and contact the A. Menarini Diagnostics customer
service.
6. Press the ejection button to remove the test strip. The meter will switch off.

4.4 Marking Test Results

After a blood (not control) glucose test is performed with a valid result, you can
mark the result as follows:
1. Start from point 3 of the glucose testing procedure (result displayed on the
screen, §4.2).
Press until the markers icons start blinking. Press ▲ or ▼ to scroll
through the icons (backwards or forwards) according to the following
sequence:
2. Press to confirm the marker you selected. You can select more markers
(but only one when setting
3. Return to point 4 of the glucose testing procedure (§4.2).
Before meal marker
After meal marker
Exercise marker
Check marker (General Purpose marker)
Void (Once confirmed it deselects any previously
selected marker)
or ) by repeating steps 1 & 2.
EN
15