S�Etting The Time, Date, And Beeper - A.MENARINI GLUCOMEN LX User Manual

S�eTTinG THe TiMe, daTe, and beeper
Having the correct time and date of each blood glucose test result helps you and your healthcare
professional track changes in your therapy. It is important to set the correct time and date so you have
records of when you tested. If you do not set the time and date, all blood glucose monitoring results will
be marked and will not be included in averages.
Your GlucoMen ® LX blood glucose meter offers a beeper function that is preset "On". This tells you when
enough blood is applied to the test strip, when test is completed, and prompts you through other steps in
using your meter.
NOTE: Remember to adjust time and date settings as needed to match the local time or daylight savings
time and after you replace the battery. Once you have completed a blood glucose or control solution test,
the last result will appear the next time your meter is turned on. The date and time displayed is the date
and time of your previous blood sugar or control solution test result, not the current date and time.
1. Press the MODE button for longer than 3 seconds. The meter, if in SLEEP
Mode, wakes up, displays all segments for 3 seconds, and enters the SETUP Mode.
1
GlucoMen LX - 38973 - 09/07
®
S�eTTinG THe TiMe, daTe, and beeper
This brings the meter display to the first setup screen: time.
Modes S�creen display
Hour (Flashing) "14": 00
Minutes (Flashing) 14 :"55"
Day (Flashing) "28"- 12 - 2006
Month (Flashing) 28 -"12"- 2006
Year (Flashing) 28 - 12 -"2006"
Sample Marking 3 (ON or OFF) "ON"
Beep (ON or OFF) "ON"
END (End of Setup Mode) "END"
2. Repeatedly press the MODE button to find the MODE you want to change.
3. Press the left/right arrow buttons to choose a new setting for that MODE.
4. Press the MODE button to select the new settings or to skip to the next MODE.
GlucoMen LX - 38973 - 09/07
®
UK
1