Post Behavior Screen Options - Dell P72G Owner's Manual

Option Description
•
If Custom Charge is selected, you can also configure Custom Charge Start and Custom Charge Stop.
Sleep Mode This option is used to select which sleep mode will be used by operating system.
•
•
Type-C Connector This option lets you set the maximum power that can be drawn from the Type-C connector.
Power
•
•

POST Behavior screen options

Option Description
Adapter Warnings Allows you to enable or disable the system setup (BIOS) warning messages when you use certain power adapters.
Default setting: Enable Adapter Warnings
Keypad Allows you to choose one of two methods to enable the keypad that is embedded in the internal keyboard.
(Embedded)
•
•
Mouse/Touchpad Allows you to define how the system handles mouse and touch pad input. The options are:
•
•
•
Numlock Enable Allows you to enable the Numlock option when the computer boots.
Enable Network. This option is enabled by default.
Fn Key Emulation Allows you to set the option where the Scroll Lock key is used to simulate the Fn key feature.
Enable Fn Key Emulation (default)
Fn Lock Options
Allows you to let hot key combinations Fn + Esc toggle the primary behavior of F1–F12, between their standard
and secondary functions. If you disable this option, you cannot toggle dynamically the primary behavior of these
keys. The available options are:
•
•
•
Fastboot Allows you to speed up the boot process by bypassing some of the compatibility steps. The options are:
72 System setup options
Custom
NOTE: All charging mode may not be available for all the batteries. To enable this option, disable the
Advanced Battery Charge Configuration option.
OS Automatic Selection
Force S3: This option is enabled by default.
7.5 Watts: This option is enabled by default.
15 Watts
Fn Key Only: This option is enabled by default.
By Numlock
NOTE: When setup is running, this option has no effect. Setup works in Fn Key Only mode.
Serial Mouse
PS2 Mouse
Touchpad/PS-2 Mouse: This option is enabled by default.
Fn Lock. This option is selected by default.
Lock Mode Disable/Standard
Lock Mode Enable/Secondary