Installing The Solid-State Drive Mounting Bracket On M.2 Slot One - Dell P106F Service Manual
Hide thumbs
Also See for P106F:
- Service manual (85 pages) ,
- Setup and specifications (25 pages) ,
- Quick start manual (14 pages)
Table of Contents
Advertisement
The following image indicates the location of the 2280 solid-state drive that is installed in M.2 slot one and provides a visual
representation of the installation procedure.
Steps
1. Align the notch on the 2280 solid-state drive with the tab on the solid-state drive slot.
2. Slide the 2280 solid-state drive firmly into the solid-state drive slot at an angle.
3. Align the screw hole on the solid-state drive with the screw hole on the palm-rest and keyboard assembly.
4. Replace the screw (M2x3) that secures the 2280 solid-state drive to the palm-rest and keyboard assembly.
Next steps
1. Install the
base
cover.
2. Exit
Service
Mode.
3. Follow the procedure in
After working inside your
computer.
Installing the solid-state drive mounting bracket on M.2 slot one
About this task
The following image provides a visual representation of the procedure to install the solid-state drive mounting bracket when
replacing M.2 2230 solid-state drive with M.2 2280 solid-state drive in M.2 slot one.
Removing and installing components
27
Hide quick links:
Advertisement
Table of Contents
