Precautionary Notes - Hunter TC37 Series Operation Instructions Manual

Precautionary Notes

CAUTION:
TC37 Series Changer Operation Instructions
When basic procedures are not followed, sharp angled wheel flanges increase
potential damage to tires during mounting. Be sure the tire bead is placed on top of
the mounting head. If the tire is incorrectly pushed onto the rim by the side of the
mounting head, it may become "trapped" and increase mounting stress to the tire
bead.
BEAD CORRECTLY PLACED ON TOP OF
MOUNTING HEAD
Insufficient lubrication and failure to place tire into drop center during mounting may
also cause the mount/demount head to fail prematurely.
Ensure the bead press is not positioned over the upper bead
roller before raising the upper bead roller. The best position for
the bead press is tucked behind the tool head arm and away
from the user. Failure to do so may cause the upper bead roller
to contact the bead press and cause damage.
Remove the upper roller from the tire.
TIRE IS INCORRECTLY PUSHED ON BY
MOUNTING HEAD
Basic Procedures• • • • 21