Table of Contents
Advertisement
3.2 Maintenance Replacement Parts
QTY
1
1
1
1
1
1
1
1
TC37 Series Changer Operation Instructions
Weekly
Periodically
NAME
Safety Goggles
Brush
Mounting Paste
Assembling Tool
Rubber Protector Pad
2-Head Cone
Pin Protector
Pin Extension
Clean the tire changer with shop towels or a vacuum
cleaner. Do not clean with or use compressed air,
which can blast dirt between moving parts.
Do not use cleaning solvents to clean pressure
regulator/oiler.
Refill the pressure regulator/oiler using only Hunter
Lubri-oil as needed. Petroleum-based oils should
never be used in the oiler and may void all
warranties.
Adjust the screw on top of the oiler to release one drop
of oil for every six (6) full up and down cycles of a roller
arm pneumatic cylinder.
Adjust push-pull cables such that the both rollers are
properly adjusted relative to a wheel rim.
Lubricate oil fittings as shown on decal on side of
storage tray.
Check for loose bolts and tighten per specifications.
NUMBER
179-15-2
RP6-G108A16
RP6-G800A37
RP6-G1000A14
RP6-710013421
RP6-1157
RP6-710090481
RP6-710012941
Maintenance and Calibration• • • • 27
Advertisement
Table of Contents
