Table of Contents
Advertisement
WARNING
!
The following are general WARNINGS
related to the setup, use, grounding,
maintenance and repair of this equipment.
FIRE
AND
EXPLOSION
Flammable fumes, such as solvents and
paint fumes, in work area can ignite or
explode. To help prevent
explosion:
Use equipment only in well ventilated area.
Provide fresh air ventilation to avoid the buildup
of flammable fumes from the material being
sprayed or from the solvent.
Eliminate all ignition sources; such as pilot lights,
cigarettes, portable electric lamps, and plastic
drop cloths (potential static arc).
Keep work area free of debris; including solvent,
rags, and gasoline.
Sprayers generate sparks. When flammable liquid
is used in or near sprayer or for flushing or
cleaning, keep sprayer at least 25 feet (7.6m)
away from explosive vapors.
Electrically disconnect all equipment in the spray
area. Do not plug or unplug power cords or turn
lights on or off when flammable fumes are
present.
Ground equipment and conductive objects in
work area. Ground object being sprayed.
If there is static sparking or you feel a shock,
stop operating immediately. Do not use
equipment until you identity and correct the
problem.
Keep a fire extinguisher in the work area.
SKIN INJECTION HAZARD
High pressure fluid from spray gun, hose leaks,
or ruptured components will pierce skin. This
may look like just a cut, but is a serious injury
that can cause amputation. Seek immediate
surgical treatment. Inform the physician as to
what type of material was injected.
77-2950-R7 (6/2023)
BINKS AIRLESS 75 SPRAY GUN
HAZARD
–
fire and
8 / 16
Do not point gun at anyone or any part of the
body. Do not put your hand or fingers over the
spray tip.
Do not stop or deflect leaks with your hand,
body, glove or rag. Do not spray without tip
guard installed.
Engage trigger lock when not spraying.
Follow pressure relief procedure for your sprayer
when you stop spraying and before cleaning,
checking or servicing your equipment.
Tighten all fluid connections before operating
equipment.
Check all hoses, tubes, and couplings daily.
Replace all worn, damaged, or loose parts
immediately.
EQUIPMENT MISUSE HAZARD
This equipment is for professional use only.
Read and understand all instructional manuals,
tags, and labels before operating equipment.
Use equipment only for its intended purpose. If
you are unsure of its purpose, call your local
BINKS distributor.
Misuse can cause death or serious injury.
Do not exceed the maximum working pressure or
temperature rating of the lowest rated system
component. See the technical data in all
equipment manuals.
Use fluids and solvents that are compatible with
your equipment wetted parts. See technical data
in all equipment manuals. Read fluid and solvent
manufacturer's warnings. For complete
information about your material, request a SDS
from your distributor or retailer.
Check your equipment daily. Do not alter or
modify your equipment. Repair or replace worn
or damaged parts immediately with genuine
BINKS Replacement Parts only.
Do not alter or modify this equipment.
Use equipment only for its intended purpose. Call
Binks for more information.
EN
www.carlisleft.com
Advertisement
Table of Contents
