Advertisement
Quick Links
Source Four
Lamp housing
Ballast
Lamp type and general information:
Do not use lamps other than the following lamp type in Source Four HID jr/Zoom
fixtures. Use of lamps other than specified below will void UL/cUL safety
compliance and your warranty.
Source Four HID jr/Zoom is suitable for damp locations
•
Yoke Can be canopy mounted
•
No recessed mounting
•
Source Four HID jr/Zoom is NOT dimmable. Dimming will damage the
Caution!
ballast and void warranty.
Lamp Type
Manufacturing Codes
CDM-T 150W/830
CDM-T 150W/942
Ceramic Metal Halide
MD150T6/U/G12/830
MBI150/T/30
MBI150/T/40
Table 1:
HID lamp reference
Ballast information
The Source Four HID jr/Zoom cannot be dimmed.
Caution!
Acceptable voltage is 120V (+/- 10%) 50/60HZ only
•
Operating current of 1.5 Amps
•
Inrush current of <14 Amps
•
Room ambient temperature should not exceed 104ºF (40ºC)
•
Lamp ignition voltage is 4.5Kv, non-hot restrike
•
Ballast case temperature should not exceed 167ºF (75ºC)
•
The ballast is attached to the Source Four HID jr/Zoom yoke by two screws, non-
•
remotable
™
HID jr and Source Four
Yoke
Drop-in
iris cover
Barrel
Watts Base Bulb
150
G12 T6
150
G12 T6
150
G12 T6
150
G12 T7
150
G12 T7
UL/cUL User Guide
Yoke
locking knob
Shutter
Pattern
holder slot
LCL
Ave. Hrs.
Initial
Color temp
lumens
56mm 9000
14000
3000ºK
56mm 9000
12700
4000ºK
56mm 9000
14000
3000ºK
57mm 6000
11500
3000ºK
57mm 6000
11250
4000ºK
Source Four™ HID jr and Source Four™ HID jr Zoom • 1
™
HID jr Zoom
Gel frame
retaining clip
Gel frame holder
Advertisement
Related Manuals for ETC Source Four HID jr
Summary of Contents for ETC Source Four HID jr
- Page 1 Gel frame holder Barrel Lamp type and general information: Do not use lamps other than the following lamp type in Source Four HID jr/Zoom fixtures. Use of lamps other than specified below will void UL/cUL safety compliance and your warranty.
- Page 2 On a fixed field angle Source Four jr/Zoom, with a 26°, 36° or 50° lens, adjust the lens position to focus the edge of the beam. On a Source Four HID jr Zoom, adjust the position of both lenses to Color frame set the beam's spread and to focus the edge of the beam.
- Page 3 Unlocked frames and accessories from falling out of the holder. Locked Always hang Source Four HID jr/Zoom with the color frame retaining Caution! clip in the locked position. Release the retaining clip by pushing it sideways. The retaining clip will pop open.
- Page 4 Replace safety screen. Replace the lens assembly. Electronic Theatre Controls North America 3030 Laura Lane • Middleton, Wisconsin 53562 • USA • Tel: (+1) 608 831 4116 • Fax: (+1) 608 836 1736 Europe 5 Victoria Industrial Estate • Victoria Road • London W3 6UU • Tel: (+44) 181 896 1000 • Fax: (+44) 181 896 2000 Asia Room 605-606 •...