ICON WEIDER XR 6.1 User Manual page 10

7. Using a small plastic bag to keep your fingers
clean, apply part of the included grease packet to
an M10 x 60mm Bolt (25).
Attach the Leg Lever (6) to the Front Leg (4) with
the M10 x 60mm Bolt (25) and an M10 Locknut
(31). Do not overtighten the Locknut; the Leg
Lever must pivot easily.
8. Insert a Pad Tube (12) through the Leg Lever
(6). Then, slide a Foam Pad (13) onto each end
of the Pad Tube.
Repeat this step with the other Pad Tube (12)
and Foam Pads (13).
9. Insert a Weight Rest (15) into an Upright (1).
Rotate the Weight Rest so that the locking
pin (D) is wrapped around the Upright.
Repeat this step with the other Weight Rest
(15). Make sure that the Weight Rests are at
the same height.
7
4
31
6
8
13
6
13
12
9
15
D
10
Grease
25
12
13
1
1
15
13