ICON WEIDER XR 6.1 User Manual page 14

ADJUSTING THE WEIGHT RESTS
To change the height of the Weight Rests (15),
remove them from the Uprights (1) and insert them
into a different set of holes in the Uprights. Rotate
the Weight Rests so that the locking pins (C) are
wrapped around the Uprights.
WARNING:
Weight Rests (15) so that the locking pins
(C) are wrapped around the Uprights (1).
Always set both Weight Rests at the same
height.
Always rotate the
1
15
14
C
1
15
C