Hatteland HM 19T14 User Manual page 45

Maritime multi display
Table of Contents

Advertisement

SPECIFICATIONS
Specifications - HM 19T14 MMD-AAT-AOBA (hw00)
TFT Technology:
• Optical Bonding Technology
• High Quality SHARP TFT
• 19.0 inch viewable image size
• Active Matrix, Thin Film Transistor (TFT)
• MVA Premium™ Technology
TFT Characteristics:
• Pixel Number
: 1280 x 1024
• Pixel Pitch (RGB)
: 0.294 (H) x 0.294 (V) mm
• Response Time
: 12 ms (typical), "black" to "white"
• Contrast Ratio
: 900:1 (typical)
• Light Intensity
: 300 cd/m2 (typical)
• Viewable Angle
: +/- 85 deg. (typical) (Up/Down/Left/Right)
• Active Display Area
: 376.32 (H) x 301.056 (V) mm
• Max Colors
: 16.7 million
Synchronization:
Sync Signal:
• Digital separate synchronization
• Composite synchronization
• Synchronization on green
• Auto detects VGA -> WUXGA, interlaced and non interlaced
• Video Signal
: Analog RGB 0,7Vp-p
: Input Impedance 75 Ohm
Synchronization Range:
• Horizontal
: 15,0 kHz to 91,1 kHz
• Vertical
: 60 Hz* to 85 Hz
* Recommended for optimal picture quality
Supported Signals:
Resolutions:
• VGA
: 640 x 480 (including 640 x 350)
• SVGA
: 800 x 600 (including 720 x 400)
• XGA
: 1024 x 768
• SXGA
: 1280 x 1024*
• UXGA
: 1600 x 1200
• WUXGA
: 1920 x 1200
* Recommended for optimal picture quality
Video Signals (with Multifunction Cable):
• Interlaced NTSC and PAL/SECAM video
• Composite video
Power Specifications:
Power Supply:
• 115&230VAC - 50 / 60Hz - 100W
Power Consumption:
52W (max)*
*Speci ed as delivered from factory. All additional loads for installed / connected
equipment have to be added to power consumption and multiplied by 1.6 to compensate
for ef ciency in power converters.
TEMPEST Configuration:
SDIP-27 Level B has been approved with the following configuration:
• VGA IN and VGA OUT using Art: VSD100699-1 (HD15 DSUB female)
• DVI-D IN using Art: HA-SDM-2M-DVI-D (29P DVI-I female)
• Composite Video IN using Art: VSD100692-4 (DB9 RS-232 female,3xBNC)*
1 pcs of each cable above is included in delivery.
*Multifunction Cable
T E S T I N G / A P P R O V A L S
TEMPEST SDIP-27 Level B
TEMPEST certi ed by the
Norwegian National Security Authority
IND100129-121
Note: All specifi cations are subject to change without prior notice!
Please visit www.hatteland-display.com for the latest electronic version.
This product have been tested / type approved by the following classification societies:
All specifications are subject to change without prior notice!
Physical Considerations:
• 483.00 (W) x 444.00 (H) x 82.00 (D) mm
• 19.02" (W) x 17.48" (H) x 3.23" (D) inch
• Weight: 11.50 kg (approx)
Signal Terminals:
• DVI-I Signal IN
• VGA Signal IN
• VGA Signal OUT
• Multifunction
• USB I/O
• AC Power IN
• AC Power OUT
**Tested at recommended resolutions. The VGA output signal is at same resolution and sync as the
VGA input. The output is working even if the display unit is turned off, but power cable/supply must
be connected/provided.
User Controls:
On front bezel - Potmeter control (IP66):
• Power On/Off and On Screen Display Menu (push button)
• Brightness Control (rotary control)
• Hotkeys (left/right - push buttons)
• Mode Status Red/Green/Orange Illuminated LED-Ring Indicator
• Buzzer
Environmental Considerations:
• Operating
• Storage
• IP Rating
• Compass Safe Distance : Standard: 160cm - Steering: 105cm
Lifetime Considerations:
Even although the test conditions for bridge units provide for a maximum
operating temperature of 55°C, continuous operation of all electronic
components should, if possible, take place at ambient temperatures of only
25°C. This is a necessary prerequisite for long life and low service costs.
Available Accessories:
• VSD100692-x
• JH MMDBR STD-A1 = Bracket
• JH 19BRD STD-A1 = Mounting Bracket EN60945 Tested
• JH MMDRO STD-A1 = Rotary Bracket
• JH 19TSV STD-A1 = Sun Visor
• JH 19VED STD-A1 = Vesa Bracket
• JH 19TAP STD-A1 = 21" CRT Adapter frame
• JH 19TAP STD-B1 = 21" CRT Custom Adapter frame
• JH 19TAP STD-A2 = 20" TFT Adapter frame
• JH 19TWC STD-B1 = Water Cover
*Please see user manual for drawings/measurements.
Factory Options:
• Color Calibrated models (ECDIS)
& C E R T I F I C A T E S
IEC 60945 4th (EN 60945:2002)
GL - Germanischer Lloyd
ABS - American Bureau of Shipping
45
: 1 x 29p DVI Female (or as VGA IN with adapter)
: 1 x 15p HD D-SUB (female)
: 1 x 15p HD D-SUB (female) - Clone of VGA IN**
: 1 x 160p D-SUB (female) - See TEMPEST Config.
: 1 x TYPE B Con. (female) Not connected/Not used
: 1 x Std IEC Inlet
: 1 x Std IEC Outlet
: Temperature -15 deg. C to +55 deg. C
- Humidity up to 95%
: Temperature -20 deg. C to +60 deg. C
- Humidity up to 95%
: Protection (EN60529): IP66 front - IP20 rear
= Custom Multifunction Cable to support more input
signals, like: RS-232, RS-485, RS-422/485, Buzzer,
ON/OFF, 1 x S-Video IN, 3 x Composite Video IN,
Remote External User Controls.
ClassNK - Nippon Kaiji Kyokai
DNV - Det Norske Veritas
BV - Bureau Veritas
2/2

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mmd-aat-aoba

Table of Contents