Clear Baseline Setup; Display Contrast - Intercomp SW500 User Manual

INDICATOR OVERVIEW
Baseline Setup (continued)

CLEAR BASELINE SETUP

To clear a setup from a memory location, press the CLEAR key. The following screen
will be displayed. Use the numeric keypad to enter the number of the memory location
to be cleared. Press the STORE/ENTER key to save the entry. To exit, press the
ACTUAL key. The Clear Baseline Setup feature will clear a baseline setup (target
weight) in the selected memory location. The current target weight will not be cleared.

DISPLAY CONTRAST

Adjusting the contrast can improve the viewing quality of the display when viewed from
different angles. The display contrast is adjusted by pressing the BACKLIGHT key and
one of the WHEEL keys simultaneously. Press the BACKLIGHT key and either the RF
or LF key simultaneously to increase the contrast. Press the BACKLIGHT key and
either the RR key or LR key simultaneously to decrease the contrast.
CLEAR SETUP FROM
MEMORY #1-99: 01
(OR ENTER '00' TO
CLEAR ALL SETUPS)
Page 18
SW500 Wired Scale System
700431 Rev G, December 2021