Change Display Format; Lock Display Format - Intercomp SW500 User Manual

INDICATOR OVERVIEW
Change Display Format (continued)

CHANGE DISPLAY FORMAT

To change the display format (the first screen displayed when the indicator is turned
on), press the 1 key and 0 key simultaneously. The following screen will be displayed:
1:OVAL
2:CUP/NW
3:ROAD RACE
4:DIRT TRK
Press a key (1 - 8) to change the format to corresponding description.

LOCK DISPLAY FORMAT

The Lock Display Format feature allows a
immediately after power-up. The different display formats are presented in the Auto
Displays and Kart Displays sections. To activate Lock Display Format feature, select
the desired display format. Simultaneously press the RF key, the 3 key and CLEAR
key. The message DISPLAY CHOICE SAVED will be displayed for approximately 1
second. Turn the indicator off and then back on. The indicator will automatically display
the selected format when the indicator is turned on.
To unlock the Lock Display Format feature, simultaneously press the RF key, the 3 key
and the CLEAR key. The message DISPLAY CHOICE UNLOCKED will be displayed for
approximately 1 second. The Change Display Format menu will then be displayed when
the indicator is turned on.
5:DRAG/RALLY
6:WHT+%
7:TOTAL
8:TOTAL + 4
specific display format to be displayed
Page 14
SW500 Wired Scale System
700431 Rev G, December 2021