Download
Share
Print this page
Kinderkraft XPEDITION 3 i-Size User Manual
  1. Manuals
  2. Brands
  3. Kinderkraft Manuals
  4. Car Seat
  5. XPEDITION 3 i-Size
  6. User manual
Kinderkraft XPEDITION 3 i-Size User Manual

Kinderkraft XPEDITION 3 i-Size User Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
XPEDITION 3 i-Size
USER GUIDE
MODEL: XPEDITION 3 i-Size
ECE R129.03
v.1.0
MODEL: I-GUARD
ECE.R129.03
ver. 1.2

Advertisement

loading
Need help?

Need help?

Do you have a question about the XPEDITION 3 i-Size and is the answer not in the manual?

Questions and answers

Related Manuals for Kinderkraft XPEDITION 3 i-Size

Summary of Contents for Kinderkraft XPEDITION 3 i-Size

  • Page 1 XPEDITION 3 i-Size USER GUIDE MODEL: XPEDITION 3 i-Size ECE R129.03 v.1.0 MODEL: I-GUARD ECE.R129.03 ver. 1.2...
  • Page 2 1.0 Usage ATTENTION! Product graphics serve an illustrative function only! The car seat has been designed, tested and approved for use in accordance with the requirements of UN/ECE Regulation No. 129 concerning the approval of child-restraint systems (UN/ECE R129/03). Do not set the car seat in a forward facing position until your child is 15 months old and 76 cm tall.
  • Page 3 Hight of the child Car seat positioning Car seat mounting ISOFIX + Top-Tether + internal safety harness 40-105 cm ISOFIX + Top-Tether + internal safety harness 76-105 cm ISOFIX + three-point car seat belt 100 – 150 cm three-point car seat belt...

  • Page 4: Safety Instructions

    2.0 Safety instructions Please take a few minutes to read this instruction manual in order to ensure the proper safety of your child. • The car seat MUST NOT be installed on the vehicle seats mounted backwards or sideways. • The car seat can only be installed on the vehicle seat with a three-point car seat belt.
  • Page 5 !WARNING! NEVER leave your child unattended in the car seat. Make sure that the luggage and other objects are adequately secured, in particular on the rear parcel shelf, as they can cause injuries in the event Please refer to your vehicle operating manual for information on the of a collision.
  • Page 6 DO NOT use the car seat if its parts are damaged or loose. On some vehicle seats made of delicate materials, the use of car seats may leave marks and/or discolouration. In order to prevent it, you can In the event of an emergency, it is important to quickly unfasten the car place a blanket, towel or similar product under the car seat.
  • Page 7 3.0 Securing the child 3.1 Installation of insert 1. Connect the headrest part of the insert with the rest of it using snap fasteners. 2. Unfasten the safety harness. Note! Make sure all fasteners are properly secured. 3. Pull the safety harness to the sides of the car seat. 4.
  • Page 8 3.2 Securing the child with the internal safety harness 1. Press the safety harness adjustment button while pulling the harness straps. Remember! Do not pull on the shoulder pads. 2. Unfasten the safety harness 3. Move the safety harness to the sides of the car seat 4.
  • Page 9 3.3 Tightening the safety harness 1. Remove any slack from the waist part of the safety harness by pulling it up using the shoulder part. 2. Pull the adjustment strap until the harness lies flat on your child's body. IMPORTANT! Make sure that the safety harness is not twisted. Make sure that the safety harness is tightened so that there is no more than 1 cm of slack between the harness and the child.
  • Page 10 Adjust the appropriate height of the shoulder part of the safety harness so that the harness enters the car seat backrest flat, horizontally, right above the child's shoulders.
  • Page 11 3.4 Height of the headrest The headrest should fit snugly around your child's head, with the lower part of the headrest at the same height as your child's shoulders. 1. Loosen the safety harness straps fully by pressing the button and pulling the safety harness straps Remember! Do not pull on the shoulder pads.
  • Page 12 3.5 Seat inclination adjustment mechanism 1. Pull the seat inclination adjustment lever 2. Adjust the seat inclination angle and release the lever in the required position (one of four possible options) 3. Move the seat slightly until you hear a distinct "click" sound. Important! There are four seat inclination options, both in forward facing and rearward facing positions.
  • Page 13 3.6 Easy spin mechanism The easy spin mechanism function helps to conveniently position the child or take the child out of the car seat. 1. Pull the rotation lever located on the base of the car seat. 2. Rotate the car seat to the desired direction, then release the lever. You will hear a "click"...
  • Page 14 4.0 Installation in the vehicle 4.1 ISOFIX installation 1. Pull the ISOFIX release lever and extend the ISOFIX connector arms to their maximum length. 2. Grasp the car seat with both hands and insert both latches into the places of installation on the vehicle seat. When you hear a "click" of each of the ISOFIX latches, push the seat of the car seat against the backrest, exerting firm, even pressure on both sides.
  • Page 15 4.2 Installation of the Top-Tether 1. Pull the Top Tether out of the storage compartment at the back of the car seat. 2. Press the belt loosening button to loosen the belt (the belt must long enough to allow the hook to be placed on the anchorage point at the rear of the vehicle seat or in the trunk).
  • Page 16 ATTENTION! To use the easy spin system, the Top Tether strap must be mounted on the inside of the vehicle (opposite the door)
  • Page 17 5.0 Stowing away the 5-point harness 1. Loosen the car seat belt as much as possible by pressing the button and pulling on the car seat belt. Remember! Do not pull on the shoulder pads. 2. Set the headrest at the highest position 3.
  • Page 18 7. Fasten the five-point internal safety harness 8. Open the compartment cover and then put the fastened safety harness into the compartment. 9. Arrange the safety harness flat along the backrest and close the compartment cover. 10. Put the cover back on the car seat using the fasteners on the edges of the fabric.
  • Page 19 6.0 Installation of the car seat Note! The car seat should be placed directly on the vehicle seat. 6.1 Children between 40 and 105 tall using the ISOFIX system and the Top-Tether strap). 1. Install the car seat on the seat rearward facing using the ISOFIX connectors (if the car seat is already installed forward facing, rotate it using an easy spin mechanism) 2.
  • Page 20 6.2 Children between 76 and 105 tall using the ISOFIX system and the Top-Tether strap). 1. Install the car seat on the vehicle seat forward facing using ISOFIX connectors. (if the car seat is already installed rearward facing, rotate it using an easy spin mechanism).
  • Page 21 6.3 Children between 100 and 150 cm - using the ISOFIX connectors and a three-point car seat belt. Important! When using the car seat for the 100-150 cm range, the car seat must be placed in a vertical position. 1. Install the car seat on the vehicle seat forward facing using ISOFIX connectors 2.
  • Page 22 7. Guide the shoulder belt through the green guide of the shoulder belt. 8. Guide the car seat belt through both waist belt guides. Fasten the car seat belt. You will hear a characteristic "click". Shoulder belt guide Waist belt guide...
  • Page 23 6.4 Children between 100 and 150 cm tall - using a three-point car seat belt. Important! When using the car seat for the 100-150 cm range, the car seat must be placed in a vertical position. 1. Install the car seat forward facing on the vehicle seat. 2.
  • Page 24 7. Fasten the fasteners and cover the car seat backrest. 8. Guide the shoulder belt through the green shoulder belt guide and then guide the car seat belt through both waist belt guides. Fasten the car seat belt. You will hear a characteristic "click". Shoulder belt guide Waist belt guide...
  • Page 25 7.0 Removing the car seat (ISOFIX installation system) 1. Loosen the Top-Tether strap by pressing the release button while pulling the strap towards you. 2. Remove the anchor hook from the vehicle's anchor point 3. Simultaneously press the ISOFIX release buttons on both ISOFIX connector arms (the colour of the markers should change to red) 4.

  • Page 26: Removing The Cover

    7.1 Removing the cover 1. Remove the insert 2. Loosen the car seat belt completely by pressing the button and pulling on the car seat belt. Remember! Do not pull on the shoulder pads. 3. Move the headrest to the highest position 4.

  • Page 27: Installing The Cover

    7. Starting at the seat of the car seat, slide the cover off the sides. 8. While stretching the material, slide it off the waist part guides and the safety harness adjustment button. 9. Pull the rubber bands on the back of the car seat backrest to remove them from the hooks.
  • Page 28 • Do not use aggressive cleaning agents (such as solvents). • The safety harness can be cleaned in lukewarm soapy water. Warning! You must never remove the metal clips from the safety harness. The full text of the Warranty Terms and Conditions is available on the website WWW.KINDERKRAFT.COM...