Turning Off The Power - Roland VS-2480 User Manual

Turning Off the Power

If you simply turn off the power, not only can recorded content be lost, but the
VS-2480/2480CD itself could malfunction. In order to safeguard the recorded
performance and turn off the power safely, you must perform the Shutdown
procedure when you are finished.
fig.01-20_50
SCRUB
ZERO
STORE
1.
Hold [SHIFT] and press [SHUT/EJECT (STOP)]. "SHUTDOWN/EJECT?"
message will appear.
fig.dialog-shutdown
2.
Press [ENTER/YES].
3.
"STORE Current?" message will appear.
fig.dialog-current store
4.
If you wish to store the currently selected project, press [ENTER/YES]. If
you do not need to save it, press [EXIT/NO]. However, this display will not
appear in the case of a demo performance or if the project is protected (i.e.,
cannot be edited).
5.
When the shutdown procedure ends correctly, the display will indicate
"POWER OFF / RESTART" (turn off the power / restart).
1 2 3
AUX 1 AUX 2 AUX 3
PREVIOUS NEXT
0 SHIFT
/ -
PREVIEW
TO THRU FROM ENTER
EXT SYNC / YES
PROJECT TOP PROJECT END
STOP PLAY REC
SHUT / EJECT RESTART AUTOMIX REC
1
2,4
EXIT
/ NO
4
Preparations
Shutdown (Appendices p.
13)
Current Project
(Appendices p. 12)
For details refer to Owner's
manual Project and Drive
Operations –"PROTECT (p.
75)".
23