Turning On The Power; Adjusting The Display Contrast; If You Do Not Understand The Display Or Don't Know What To Do - Roland VS-1824 User Manual

Turning On the Power

1
The rear panel POWER switch turns on the power of the VS-
1824. When the VS-1824 starts up correctly, the following
display will appear.
fig.1-09_80
2
Turn on the power of your audio system.
3
Raise the volume of your audio system to an appropriate level.

Adjusting the Display Contrast

The text or icons in the VS-1824's display may be
difficult to read immediately after the unit is turned on
or after it has been used for long periods, or depending
on the environment in which the unit is used. If this
occurs, rotate the CONTRAST knob located at the right
side of the display to adjust the display contrast.
fig.1-10
If You Do Not Understand the Display or
Don't Know What to Do
If an unfamiliar display appears or if you do not know how you arrived at
the current condition, press [PLAY (DISPLAY)]. This will return you to the
initial power-on screen, allowing you to re-do the procedure from the
beginning.
fig.1-11
Preparations
When the power is turned
on, the disk drive will be
detected, and necessary
data will be read. For this
reason there will be an
interval of time before
operation can begin.
Once the connections have
been completed (p. 12),
turn on power to your
various devices in the order
specified. By turning on
devices in the wrong order,
you risk causing
malfunction and/or
damage to speakers and
other devices.
Always make sure to have
the volume level turned
down before switching on
power. Even with the
volume all the way down,
you may still hear some
sound when the power is
switched on, but this is
normal, and does not
indicate a malfunction.
13