Applying A Loop Type Effect During Playback - Roland VS-2480 User Manual

Applying a Loop Type Effect During
Playback
It is common to apply a send/return type effect such as reverb or delay during
playback. The following example shows how you can apply reverb (FX1) to track 1
during playback.
fig.04-03_55
PAGE
1.
Press [HOME (DISPLAY)]. Home Condition screen will appear.
2.
As described in "Selecting the effect bus assignment (p. 52)," specify
which AUX bus will be used as the effect bus.
3.
Press [TR 1-16 (MASTER EDIT)]. [TR 1-16 (MASTER EDIT)]
indicator will light, and [CH EDIT] will be the Track Mixer
channel edit buttons for channels 1–16.
fig.04-04_30000000
4.
Hold [STOP] and press track channel 1
[TRACK STATUS]. [TRACK STATUS] will light
green, track channel 1 will be the playback track.
fig.04-05
5.
Press [CH EDIT] for the track mixer channel whose effect you wish to use.
For this example, Press channel 1 [CH EDIT]. Mixer Condition screen will
appear.
fig.04-04_30
5
PHRASE SEQ
/ AUTOMIX
MANUAL
WRITE
READ
FROM
TO
TRACK
REC
PLAY
OFF
1 2 3 4
PHRASE
PAD
17 18 19 20
fig.tr-chview
F1 F2 F3 F4
CH EDIT
/ SELECT / PHRASE SEQ STATUS / AUTOMIX STATUS
TRACK STATUS / PHRASE PAD
5 6 7 8 9 10
AUX 2
AUX1
MST
21 22 23 24
FX1 FX 2
RTN
1
DISPLAY
F5 F6
HOME
IN 1-16 IN 17-24
AUX MST
SOLO MUTE
TR 1-16 TR 17-24
FX RTN
V.FADER
MASTER
EDIT
FADER
STOP
+
SHUT / EJECT
11 12 13 14 15 16
AUX 3 AUX 4 AUX 5 AUX 6 AUX 7 AUX 8
FX 3 FX 4 FX 5 FX 6 FX 7 FX 8
Using Effects
1
53