Roland VS-2480 User Manual page 74

Add Finishing Touches to Your Project
fig.05-10_35
16. Press [TR 1-16 (MASTER EDIT)]. [TR 1-16 (MASTER EDIT)]
indicator will light, and channel faders will adjust the Track
Mixer channel 1–16.
17. Hold [STOP], press [TRACK STATUS] for the Track Mixer
channel 1–24 which you want to mixdown.
[TRACK STATUS] indicator will light green.
fig.05-11_45
1 2 3 4
17 18 19 20
18. Press [PLAY]. The project will playback.
fig.05-09_50
TO
TRACK
REC
PLAY
OFF
1 2 3 4
PHRASE
PAD
17 18 19 20
(dB)
R 6
4
0
4
8
12
18
24
42
L
19. Raise and lower the master fader, and verify that the volume of each track
changes.
20. Use the channel faders (1–24) to adjust the volume balance of each track. At
this time, the sound that is being output from the MASTER jacks (volume
levels, panning) will be recorded to the mastering tracks. It is best to set
The volume as high as possible without causing the volume to distort.
21. When you have finished adjusting the volume, press [STOP].
22. Press [HOME (DISPLAY)], Home Condition screen will appear.
74
TRACK STATUS / PHRASE PAD
5 6 7 8 9
AUX 2
AUX1
MST
21 22 23 24
FX1
RTN
+
STOP
SHUT / EJECT
TRACK STATUS / PHRASE PAD
5 6 7 8 9 10 11 12
AUX1 AUX 2 AUX 3 AUX 4 AUX 5 AUX 6 AUX 7 AUX 8
MST
21 22 23 24
FX1 FX 2 FX 3 FX 4
RTN
20
IN 1-16
SOLO
TR 1-16
MASTER
EDIT
FADER
10 11 12 13 14
AUX 3 AUX 4 AUX 5 AUX 6 AUX 7 AUX 8
FX 2 FX 3 FX 4 FX 5 FX 6
TR 1-16 TR 17-24
16
FX RTN
V.FADER
MASTER
EDIT
13 14 15 16
FADER
MASTER
FX 5 FX 6 FX 7 FX 8
(dB)
6 R
4
0
4
8
12
18
24
42
L
19
IN 17-24
AUX MST
MUTE
TR 17-24
To switch the [TRACK
FX RTN
STATUS] of tracks 17–24,
V.FADER
press [TR 17-24 / FX RTN
(V.FADER)], getting the
indicator to light, and
then switch the setting.
15 16
FX 7 FX 8
The sound that passes
through the master fader
will be recorded on the
mastering tracks. In order
to record at the optimal
audio quality, you should
normally set this to the 0
dB position.