Canceling The Recording; Canceling A Record Result (Undo); Canceling The Undo (Redo) - Roland VS-2480 User Manual

Canceling the Recording

■ Canceling a Record Result (Undo)

If the recording level was too low, if you made a mistake in your performance, or if
for any other reason you wish to re-do the recording, you can use the following
procedure to cancel the contents of the recording. This is called the Undo function.
Undo the previously performed editing operation and return to the prior state.
fig.03-16_50
1.
Press [UNDO (REDO)].
2.
"UNDO Level" will appear. Use TIME/VALUE
dial to specify how many steps you wish to
return.
fig.03-47(lcd undolist
3.
Press [ENTER/YES]. [UNDO (REDO)] will light,
Undo operation has been executed successfully.

■ Canceling the Undo (Redo)

You can also cancel the previously-executed Undo to return to the original state, and
this is called the Redo function.
Note, for example, that if you've carried out Undo two times in a row, by using Redo,
you're returned to the state in effect immediately before you ran Undo for the second
time.
fig.03-17_50
1.
Make sure that [UNDO (REDO)] indicator is
lit. Then hold [SHIFT] and press
[REDO (UNDO)]. "Cancel the last UNDO?"
message will appear.
2.
The previously executed Undo will be
cancelled, and the data will return to the
prior state. Check that the editing operation
prior to the Undo has returned to the undo
level.
Making a Multi-Track Recording
3
DISPLAY
F4 F5 F6
HOME
CK EDIT
DELETE SPLIT NEW PHRASE
IMPORT REGION
ERASE COMP / EXP.
GRADATION AUTOMIX
TO LOOP WAVE DISP UNDO
REDO
MIDI / DISK
+
+
ZOOM
TIME / VALUE
SHUTTLE
SHIFT
ENTER EXIT
C / YES / NO
C
3
REC
TRACK EDIT
TRIM OUT DELETE SPLIT NEW PHRASE
IMPORT REGION
CUT ERASE COMP / EXP.
AUTOMIX
GRADATION
FROM TO LOOP WAVE DISP UNDO
REDO
UTILITY
/
MIDI DISK
1
+
+
ZOOM
SCENE
BANK
TIME / VALUE
SHUTTLE
SHIFT
ENTER EXIT
EXT SYNC
/ YES / NO
REC
AUTOMIX REC
When you execute Undo,
the recorded data will
appear to have
disappeared. However, the
data that is no longer
played back will not be
erased from the hard disk
until you save that project
(p. 49). For this reason,
executing Undo will not
1
increase the available
recording time.
You cannot canceling the
Mixer settings and Effect
settings. At this time,
register to the scene. (p. 30)
Redo allows you to change
your mind about your most
recent Undo, allowing you
to go back to having the
change put into effect, thus
"redoing" it.
39