Assigning Track Numbers; Erasing Track Number Markers - Roland VS-2480 User Manual

■ Assigning Track Numbers

When you write an audio CD, a track number will automatically be assigned to
"00h00m00s00f." For this reason, the track number markers and the actual project
order will be as follows.
fig.05-15
00h00m00s00
Song 1 (First song)
If you write additional projects onto a CD-R disc to which projects have already been
written, track numbers will be assigned in sequence to follow the previously-written
projects. For example if five songs have already been written to the CD-R disc, the
next song you write will be song number six.
fig.05-16
00h00m00s00
Song 1 (Sixth song)
If five songs have already been written to the CD-R disc

■ Erasing Track Number Markers

fig.05-17_60
2
1.
Move to the location where you wish to erase a marker.
2.
Hold [CLEAR] and press [TAP].
Marker 1
Song 2 (Second song)
When a blank CD-R disc is used
Marker 1
Song 2 (Seventh song)
4 5 6
MARKER
AUX 4 AUX 5 AUX 6
1 2 3
AUX 1 AUX 2 AUX 3
PREVIOUS NEXT
0
/ -
PREVIEW
FROM
TO THRU
EXT SYNC
SCRUB
PROJECT TOP PROJECT END
Add Finishing Touches to Your Project
Marker 2 Marker 3
Song 3 (Third song)
Marker 2 Marker 3
Song 3 (Eighth song)
TIME / VALUE
SHUTTLE
1
SHIFT
ENTER EXIT
/ YES / NO
The first track number
marker is created
automatically at the
beginning of the project
(00h00m00s00). Audio CD
specifications require that a
song be at least four
seconds in duration. For
this reason, track number
markers must be placed
four seconds apart. If you
Time
attempt to place a marker
within four seconds of
another marker, "Can't Set
Marker" will be displayed
and the marker will not be
placed.
Audio CD standard allow
up to 99 songs to be stored
on one disc. Furthermore,
even if no track number
marker is set at the
beginning of the project, it
is still used for the
beginning of the first song.
Time
Thus, you can set up to 98
markers as track numbers.
81