Use The Filter To Adjusting The Tone Of Each Track - Roland VS-2480 User Manual

fig.03-34
2.
Press [TR 1-16 (MASTER EDIT)]. [TR 1-16 (MASTER EDIT)]
indicator will light, [CH EDIT] will be the Channel Edit
button of the Track Mixer channel 1–16.
3.
Press [CH EDIT] of the track that you wish to adjust the
equalizer. [CH EDIT] indicator will light.
fig.03-40_35
RATIO THRESHOLD ATTACK RELEASE
Dynamics
PHRASE SEQ
/ AUTOMIX
3
MANUAL
WRITE
READ
FROM
TO
TRACK
REC
PLAY
OFF
1 2 3
PHRASE
PAD
4.
Press [PRM EDIT]. [PRM EDIT] indicator will light red.
5.
Turn the "Freq," "Gain," and "Q" knobs for "EQ Low"–"EQ High" to
adjust the tonal character.
6.
If you wish to adjust of other tracks, repeat Steps 3–5.
7.
When you finish playback, press [STOP].The project playback will stop.
8.
Press [HOME (DISPLAY)]. Home Condition screen will appear.
fig.03-41_50
PAGE

■ Use the Filter To Adjusting the Tone of Each Track

The channels are provided with filters. There are four kinds of filters; you can use
any one of these to adjust the tonal quality of the sound.
Try using the filter to adjust the sound quality of each track.
fig.03-42_50
1.
Press [PLAY]. The project will
playback.
fig.03-34
2.
Press [TR 1-16 (MASTER EDIT)]. [TR 1-16 (MASTER EDIT)]
indicator will light, [CH EDIT] will be the Channel Edit
button of the Track Mixer channel 1–16.
PAN
/ AUX SEND 1-8
LEVEL FREQ GAIN FREQ GAIN FREQ
Filter EQ Low EQ Lo - Mid
CH EDIT
/ SELECT / PHRASE SEQ STATUS / AUTOMIX STATUS
TRACK STATUS / PHRASE PAD
4 5 6 7 8 9 10
AUX 2 AUX 3 AUX 4 AUX 5 AUX 6 AUX 7 AUX 8
F1 F2 F3 F4
Making a Multi-Track Recording
IN 1-16
SOLO
TR 1-16
MASTER
EDIT
FADER
5
Q GAIN FREQ Q GAIN FREQ
EQ Hi - Mid EQ High
11 12 13 14 15 16
DISPLAY
F5 F6
HOME
8
ZERO STOP PLAY
STORE SHUT / EJECT RESTART AUTOMIX REC
9 1
IN 1-16
SOLO
TR 1-16
MASTER
EDIT
FADER
IN 17-24
AUX MST
If you set the Track Mixer
MUTE
17–24, press [TR 17-24/FX
TR 17-24
FX RTN
RTN (V.FADER)].
V.FADER
4
AUX PHRASE
SEND PAD PLAY
PRM PHRASE
SEQ
EDIT
When the [PRM EDIT]
IN 1-16 IN 17-24
AUX MST
indicator is dark, these
SOLO MUTE
knobs will be the PAN
TR 1-16 TR 17-24
FX RTN
knobs.
V.FADER
MASTER
EDIT
FADER
The "Q" parameter can be
adjusted only for "EQ
Lo-Mid" and "EQ Hi-Mid."
You can adjust the EQ
parameters from the
Channel Edit screen.
When the equalizer switch
is turned off, no change is
made in the tonal quality
even if a parameter is
changed. If you do want to
change the tonal quality,
REC
you must first turn the
equalizer switch on, either
in the Parameter Edit
screen or the Channel Edit
screen.
IN 17-24
AUX MST
MUTE
TR 17-24
FX RTN
V.FADER
47