fig.battery1_69
4.
The battery should now be visible, as shown in the following.
fig.battery2_69
CR2032
CR2032
5.
If Effect Expansion Board (VS8F-2) installed on the EFFECT A section,
remove the VS8F-2 of the EFFECT A section.
6.
Replace the old battery with a new one.
Preparations
When turning the unit
upside-down, get a bunch
of newspapers or
magazines, and place them
under the four corners or at
both ends to prevent
damage to the buttons and
controls. Also, you should
try to orient the unit so no
buttons or controls get
damaged.
17