Table of Contents
Advertisement
WebRCS Web app
The WebRCS Web app is a remote control app that's built into the VR-400UHD. This app lets you remotely control the VR-400UHD from a computer
that's on the same network via a browser.
* There is no need to install dedicated app on your computer.
Operating environment
The Web browsers that are compatible with this app are shown
below.
Windows
Google Chrome 56 or later
Safari 10 or later
Mac
Google Chrome 56 or later
* JavaScript must be enabled on the browser you're using.
* Although the app has been tested under these operating
environments, operation is not guaranteed. Operating conditions
may differ depending on the state of your network or the
processing capabilities of your Web browser, among other factors.
Launching the app
Getting ready
1.
Follow the steps in "Connecting to a network" (p. 29)
to connect the VR-400UHD to a computer that's on the
same network.
2.
Follow the steps in "Setting a password" (p. 29) to set
the password used for connecting to the network.
When using the VR-400UHD
3.
Press the [SETUP] button and touch the <Remote URL>
tab.
This shows the WebRCS URL.
There are two versions of WebRCS.
Lets you operate all of the functions available on the
VR-400UHD.
Full
Input video is not shown.
Lets you switch between scenes while checking the input
video (updated every five seconds).
Simple
Does not allow scenes to be edited, nor can you configure
the settings on this unit.
32
When using your computer
4.
Launch the Web browser on a computer that's on your
network.
5.
In the address bar of your Web browser, input the URL
that's shown in "Remote URL".
The "Login" dialog box appears.
6.
Enter your user name and password to login to the
network.
User name
user
Password
Password that you set (p. 29)
This launches WebRCS, and you can now remotely control the
VR-400UHD from your Web browser.
WebRCS: Full
WebRCS: Simple
Advertisement
Table of Contents
