Table of Contents
Advertisement
D3T Series Bullet & Turret
User Manual
Thank you for purchasing our product. If there are any
questions, or requests, do not hesitate to contact the
dealer.
This manual applies to the models below:
Type I Camera
Type II Camera
Type III Camera
Type IV Camera
Type V Camera
Type VI Camera
Type VII Camera
This manual may contain several technical incorrect
places or printing errors, and the content is subject to
change without notice. The updates will be added to
the new version of this manual. We will readily improve
or update the products or procedures described in the
manual.
TURBO HD
User Manual
Model
DS-2CE16D3T-I3PF
DS-2CE16D3T-I3F
DS-2CE16D3T-ITPF
DS-2CE16D3T-ITF
DS-2CE16D3T-IT3F
DS-2CE76D3T-ITMF
DS-2CE78D3T-IT3F
DS-2CE57D3T-VPITF
DS-2CE76D3T-ITPF
Camera
0100001081128
Advertisement
Table of Contents
Related Manuals for HIKVISION TURBO HD D3T Series
Summary of Contents for HIKVISION TURBO HD D3T Series
- Page 1 TURBO HD D3T Series Bullet & Turret Camera User Manual User Manual Thank you for purchasing our product. If there are any questions, or requests, do not hesitate to contact the dealer. This manual applies to the models below: Model DS-2CE16D3T-I3PF Type I Camera DS-2CE16D3T-I3F...
-
Page 2: Regulatory Information
Regulatory Information FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. - Page 3 Safety Instruction These instructions are intended to ensure that user can use the product correctly to avoid danger or property loss. The precaution measure is divided into “Warnings” and “Cautions”. Warnings: Serious injury or death may occur if any of the warnings are neglected.
- Page 4 Keep the camera away from liquid while in use for non-water-proof device. While in delivery, the camera shall be packed in its original packing, or packing of the same texture. Mark Description Table 0-1 Mark Description Mark Description DC Voltage...
- Page 5 1 Introduction 1.1 Product Features The main features are as follows: High performance CMOS sensor IR cut filter with auto switch OSD menu with configurable parameters Auto white balance Internal synchronization SMART IR mode 4 in 1 video output (TVI/AHD/CVI/CVBS) ...
- Page 6 1.2.4 Type IV Camera Clip Plate Mounting Base Trim Ring Enclosure Main Body Switch Button Power Cord DC12V Video Cable Figure 1-4 Overview of Type IV Camera Note: Press and hold the switch button for 5 seconds to switch the video output. Four kinds of video outputs are available: TVI, AHD, CVI, and CVBS.
- Page 7 1.2.7 Type VII Camera Mounting Base Switch Button Power Cord D C1 2V 12 VDC Main Body Video Cable Enclosure Figure 1-7 Overview of Type VII Camera Note: Press and hold the switch button for 5 seconds to switch the video output. Four kinds of video outputs are available: TVI, AHD, CVI, and CVBS.
-
Page 8: Menu Description
2 Menu Description Please follow the steps below to call the menu. Note: The menu description part is only for your reference. It might have some differences due to the specific model that you have. Steps: 1. Connect the camera with the TVI DVR, and the monitor, shown as the Figure 2-1. -
Page 9: Video Format
1). Click up/down direction button to select the item. 2). Click Iris + to confirm the selection. 3). Click left/right direction button to adjust the value of the selected item. 2.1 VIDEO FORMAT You can select the video format as 2MP@25fps , or 2MP@30fps. - Page 10 You can set the SLOW SHUTTER function as OFF, x2, x4, x6, x8, x10, x12, x14, or x16 according to the different light conditions. 2.2 DAY/NIGHT COLOR, B&W (Black White), and AUTO are selectable for DAY and NIGHT switches. COLOR The image is colored in day mode all the time.
-
Page 11: Video Settings
set the value from 1 to 9. The larger the value is, the more sensitive the camera is. N-D THRESHOLD (Night to Day Threshold) Night to Day Threshold is used to control the sensitivity of switching the night mode to the day mode. You can set the value from 1 to 9. -
Page 12: Factory Default
CONTRAST This feature enhances the difference in color and light between parts of an image. You can set the CONTRAST value from 1 to 9. SHARPNESS Sharpness determines the amount of detail an imaging system can reproduce. You can set the SHARPNESS value from 1 to 9.
Need help?
Do you have a question about the TURBO HD D3T Series and is the answer not in the manual?
Questions and answers