Safety Warnings - Eaton 9395 SSBM Installation And Operation Manual

1.2

Safety Warnings

Eaton 9390 UPS, 9395 UPS, and 9395 SSBM Sync Control Installation and Operation Manual
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
This manual contains important instructions that should be followed during installation and maintenance of
the UPS or SBM and batteries. Please read all instructions before operating the equipment and save this
manual for future reference.
The UPS or SBM cabinet is designed for industrial or computer room applications, and contains safety
shields behind the doors. However, these units comprise a sophisticated power system and should be
handled with appropriate care.
The UPS or SBM contain LETHAL VOLTAGES. All repairs and service should be performed by
AUTHORIZED SERVICE PERSONNEL ONLY. There are NO USER SERVICEABLE PARTS inside the UPS
or SBM.
S
The UPS system contains its own energy source (batteries). The output terminals may carry live voltage
even when the UPS is disconnected from an AC source.
S
To reduce the risk of fire or electric shock, install this UPS or SBM in a temperature and humidity
controlled, indoor environment, free of conductive contaminants. Ambient temperature must not exceed
40C (104F). Do not operate near water or excessive humidity (95% maximum). These systems are not
intended for outdoor use.
S
Ensure all power is disconnected before performing installation or service.
S
Keep the UPS or SBM doors closed to ensure proper cooling airflow and to protect personnel from
dangerous voltages inside the unit.
S
Do not operate the UPS or SBM close to gas or electric heat sources.
S
The operating environment should be maintained within the parameters stated in this manual.
S
Keep surroundings uncluttered, clean, and free from excess moisture.
S
Observe all DANGER, CAUTION, and WARNING notices affixed to the inside and outside of the
equipment.
D A N G E R
W A R N I N G
C A U T I O N
S
P-164000052 Rev 2 www.eaton.com/powerquality
INTRODUCTION
1-3