Removing The Ap - Ruijie RG-AP180-I Hardware Installation And Reference Manual

Hardware Installation and Reference Guide
Figure 3-8 Installing the Anti-Theft Screw
Caution
When installing or moving the wireless AP, ensure that the power supply is cut off.
Ensure that the screws are tightened.
Ensure that the wireless AP installation position facilitates indicator status observation.
Ensure that the device is at least 10 cm away from other objects in the upper, lower, left, and right
directions, and no obstacle is under the device that blocks cables out from the network port.
3.4.2

Removing the AP

Use a torx screwdriver to remove the anti-theft screw on the side of the AP and push the AP upwards to remove
it.
20
Installing the Access Point