Panasonic PT-EZ770 Series Operating Instructions Manual page 97

14) If [CLOCK PHASE] is selected in Step 8), press qw to make adjustment.
15) Press as to select [FRAME LOCK].
16) Press qw to switch the item.
[MAIN WINDOW]
[SUB WINDOW]
17) Press as to select [TYPE].
18) Press qw to switch the item.
[MAIN WINDOW]
[SUB WINDOW]
Note
f The P IN P function may not be available for some signals being input or terminals being selected. Refer to "Two-window display
combination list" (x page 142) for details.
f The main window setting values are applied to image adjustment values such as [PICTURE MODE], [GAMMA], and [COLOR
TEMPERATURE].
f On the normal screen (when no menu is displayed), press as to switch the size and position of the main window and sub window while P
IN P is operating.
f If the signals from the <RGB 1 IN> or <RGB 2 IN> terminal are input to either the main window or the sub window, and those input signals
are analog RGB or YC C /YP
B R
window and sub window is RGB1 and RGB2, the signals of the main window take priority for output.
Chapter 4 Settings — [P IN P] menu
Set frame lock to the input signal set in the main window.
Set frame lock to the input signal set in the sub window.
The main window has display priority.
The sub window has display priority.
P signals, the signals are output from the <MONITOR OUT> terminal. If input combination of the main
B R
ENGLISH - 97