Table of Contents
Advertisement
2)
Press the <ENTER> button.
f The [SHUTTER SETTING] screen is displayed.
3)
Press as to select [SHUT-OFF].
4)
Press qw to switch the item.
[KEEP CURRENT STATE]
[OPEN]
[CLOSE]
[P-TIMER]
Set and operate the presentation timer function.
Setting the mode
1)
Press as to select [P-TIMER].
2)
Press the <ENTER> button.
f The [P-TIMER] screen is displayed.
3)
Press as to select [MODE].
4)
Press qw to switch the item.
[COUNT UP]
[COUNT DOWN]
Setting the timer
1)
Press as to select [P-TIMER].
2)
Press the <ENTER> button.
f The [P-TIMER] screen is displayed.
3)
Press as to select [TIMER].
4)
Press qw to set the time.
f The time can be set in 1-minute increments from 1 to 180 minutes.
f The factory default value is 10 minutes.
Note
f [TIMER] is enabled when [MODE] is set to [COUNT DOWN].
Using the presentation timer
1)
Press as to select [P-TIMER].
2)
Press the <ENTER> button.
f The [P-TIMER] screen is displayed.
3)
Press as to select the item, and press the <ENTER> button.
[START]
[STOP]
[RESTART]
[RESET]
f When [START] or [RESTART] is selected, the elapsed time or the remaining time is displayed at the bottom right of the projected
image.
f When [STOP] is selected, the elapsed time or the remaining time when the count was stopped is displayed at the bottom right of the
projected image.
f When [RESET] is selected, proceed to Step 4).
Chapter 4 Settings — [DISPLAY OPTION] menu
When the projector is switched off, the projector turns into standby with the shutter status as is.
When the projector is switched off, the projector turns into standby with the shutter left opened.
When the projector is switched off, the projector turns into standby with the shutter left closed.
Displays the elapsed time since the count was started.
Displays the remaining time of the time set by [TIMER].
The count is started.
The count is stopped.
The count is resumed.
The count is reset.
ENGLISH - 81
Advertisement
Table of Contents
