Table of Contents
Advertisement
[Adjust clock] page
Click [Detailed set up] → [Adjust clock].
1
[Timezone]
Selects the time zone.
2
[Set time zone]
Updates the time zone setting.
3
[NTP SYNCHRONIZATION]
Sets to [ON] to adjust the date and time automatically.
4
[NTP SERVER NAME]
Enter the IP address or server name of the NTP server when
you set to adjust the date and time manually.
(To enter the server name, the DNS server needs to be set up.)
Note
f The replacement of the battery inside the projector is required when the time goes out of alignment right after correcting the time. Consult
your dealer.
Chapter 4 Settings — [NETWORK] menu
1
2
3
4
5
6
7
5
[Date]
Enter the date to be changed.
6
[Time]
Enter the time to be changed.
7
[Set date and time]
Updates the date and time settings.
ENGLISH - 115
Advertisement
Table of Contents
