6.3.6 To prevent the outdoor unit from falling over
RXQ-A_ARXQ-A
R32 split series
4P513661-11P – 2021.11
a Drain port
b Bottom frame
c Drain plug
d Hose (field supply)
In case the unit is installed in places where strong wind can tilt the unit, take
following measure:
1 Prepare 2 cables as indicated in the following illustration (field supply).
2 Place the 2 cables over the outdoor unit.
3 Insert a rubber sheet between the cables and the outdoor unit to prevent the
cables from scratching the paint (field supply).
4 Attach the ends of the cables.
5 Tighten the cables.
6
Unit installation
|
Installer reference guide
31