17
|
Unit installation
17.3.6 To prevent the outdoor unit from falling over
Installer and user reference guide
80
INFORMATION
It is recommended to install the optional bottom plate heater (EKBPH250D7) when
the unit is installed in cold climates.
In case the unit is installed in places where strong wind can tilt the unit, take
following measure:
1 Prepare 2 cables as indicated in the following illustration (field supply).
2 Place the 2 cables over the outdoor unit.
3 Insert a rubber sheet between the cables and the outdoor unit to prevent the
cables from scratching the paint (field supply).
4 Attach the ends of the cables.
5 Tighten the cables.
RXYSA4~6A7V/Y1B
VRV 5-S system air conditioner
4P600330-1D – 2023.02