Preparing The Environment - National Instruments PXIe-5663E Getting Started

Other Equipment
There are several required items not included in your device kit that you need to
install or operate the NI 5663E.
Required Items
A PXI Express chassis and chassis documentation. The NI PXIe-1075 chassis
■
is one available option for your device. For more information about
compatible chassis options, refer to ni.com.
A PXI Express embedded controller or MXI controller system that meets the
■
system requirements specified in this guide and chassis documentation.
Optional Items
A 1 N · m standard SMA torque wrench (NI part number 780487-01).
■

Preparing the Environment

Ensure that the environment you are using the NI 5663E in meets the following
specifications.
Operating ambient temperature
(IEC 60068-2-1, IEC 60068-2-2)
Operating relative humidity (IEC 60068-2-56)
Maximum altitude
Pollution Degree
Indoor use only.
Caution
Clean the hardware with a soft, nonmetallic brush or lint free
cloth. Make sure that the hardware is completely dry and free from
contaminants before returning it to service.
PXIe-5663E Getting Started
0 °C to 55 °C
10% to 90%, noncondensing
2,000 m (800 mbar) (at 25 °C ambient
temperature)
2
7
© National Instruments